CAN_daugther

CAN Transceiver

This is CAN adaptor daughter board that used with the STM32 Motherboard. It is used to monitor a CAN network, read and write from/to a CAN bus. The CAN adaptor connects the CAN bus to the USB port of a PC or notebook. The CAN adaptor has a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard and provides galvanic isolation of up to 5000 VRMS.

Category:
Description

Description

The CAN transceiver is a daughter board that can be used with the STM32 USB motherboard. It is a CAN adaptor that can be used to monitor a CAN network, read and write from/to a CAN bus. The CAN adaptor connects the CAN bus to the USB port of a PC or notebook, which also supplies the power to the adapter. The CAN adaptor has a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard and provides galvanic isolation of up to 5000 VRMS. The CAN transceiver can be fully controlled from the STM32 MCU and write your own applications.
The adaptor can be connected to a OBD II or DB9 connector.

Technical specifications

  • Used with STM32F072 Motherboard
  • USB 2.0 Full speed (12 Mbps)
  • Support CAN 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • 5000-VRMS Isolation
  • CAN baud rate up to 1 Mbps

Applications

  • Vehicle and automotive telematics
  • Industrial and factory automation, control, sensors, and drive systems
  • Building and climate control (HVAC) automation
  • Security systems
  • Transportation
  • Medical
  • Telecom
  • Supports CAN bus standards such as CANopen, DeviceNet, NMEA2000, ARINC825, ISO11783, CAN Kingdom, CANaerospace