Description
The is a full starter kit used with NB-IoT & GNSS hardware board. The kit includes sensors, actuators, motors, keypad, LCD and display, and motors. The Kit enables you to perform many electronics projects using Arduino. The kit includes more than 30 Arduino sketches & projects ready for running on the NB-IoT &GNSS hardware board. This kit can be used as Do-It-Yourself (DIY).
Features
- NB-IoT & GNSS Hardware board
- More than 40 hardware components for building different Arduino projects.
- Ready-made Arduino sketches to exercise the Arduino projects.
- Kit are packages in small firm package of size 240 x 160 x 60 mm
Kit Hardware Content
Item # | Name | Quantity |
1 | 5G NB-IoT Hardware Board | 1 |
2 | LTE & GPS Antenna | 1 |
3 | 4*4 Matrix Keypad | 1 |
4 | 5V Relay | 1 |
5 | Step Motor | 1 |
6 | Temperature Sensor LM35 | 1 |
7 | Motor | 1 |
8 | IR Receiver | 1 |
9 | Vibration Sensor SW-520D | 2 |
10 | Jumper Cap | 4 |
11 | Key Switch(yellow) | 5 |
12 | DHT11 Module | 1 |
13 | Clock Module | 1 |
14 | Big Sound Module | 1 |
15 | Water Module | 1 |
16 | Photocell | 3 |
17 | Active Buzzer | 1 |
18 | SN74HC595 | 1 |
19 | 3-color LED | 1 |
20 | 7 Segment | 1 |
21 | 4-7 Segment | 1 |
22 | Passive Buzzer | 1 |
23 | B10K Variable | 1 |
24 | Flame | 1 |
25 | SG90 Servo | 1 |
26 | 1602 Display | 1 |
27 | 8*8 Matrix | 1 |
28 | 830 Breadboard | 1 |
29 | Joystick | 1 |
30 | RFID Module | 1 |
31 | Remote Control | 1 |
32 | Blue LED | 10 |
33 | Red LED | 10 |
34 | Green LED | 10 |
35 | 330R Resistance | 10 |
36 | 220R Resistance | 10 |
37 | 10K Resistance | 10 |
38 | 1K Resistance | 10 |
39 | Jumper Wire | 1 |
40 | F-M Dupont Wire | 1 |
41 | 2.54mm 40Pin | 1 |