top_EG95_EX

Compact LTE Cat 4 IoT & GNSS (EG95-EX) – Europe, Middle East, Africa

$129.00

This is an LTE category 4 moduleĀ  with integrated GNSS for wide industrial and commercial uses. It has EG95 module in USB dongle form factor for Europe, Africa, and Middle East regions. It is optimized specially for M2M and IoT applications and delivers 150Mbps downlink and 50Mbps uplink data rates.

Category:
Description

Description

EG95 is a series of LTE category 4 & GNSS module optimized specially for M2M and IoT applications. It is for Europe, Africa, and Middle East regions. Adopting 3GPP LTE technology, it delivers 150Mbps downlink and 50Mbps uplink data rates. EG95 can be connected even in remote areas devoid of 4G network coverage.

EG-95 supports QualcommĀ® IZatā„¢ location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning.

A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB serial drivers for Windows 7/8/10, Linux, Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance, digital signage and so on.

  1. LTE category 4 module optimized for broadband IoT applications
  2. Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  3. Standard PCI ExpressĀ® MiniCard form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices
  4. MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
  5. Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
  6. LTE FDD: B1/B3/B7/B8/B20/B28.
  7. WCDMA: B1/B8
  8. GSM/EDGE: B3/B8

Data Rate

  1. LTE FDD: 150 (DL)/50 (UL)
  2. DC-HSPA+: 42 (DL)/5.76 (UL)
  3. WCDMA: 384 (DL)/384 (UL)
  4. EDGE: 296 (DL)/236.8 (UL)
  5. GPRS: 107 (DL)/85.6 (UL)

Interfaces

  1. USB 2.0 with High Speed up to 480Mbps
  2. Nano USIM Interface
  3. NETLIGHT
  4. UART Ɨ 2 (Main UART and Debug UART)
  5. RESET _N andĀ  PWRKEY
  6. Main and Rx-diversity Antenna Interfaces
  7. GNSS Antenna Interface

Software Features

  • USB Serial Driver:
    Windows 7/8/8.1/10, Windows CE 5.0/6.0/7.0*,
  • Linux 2.6/3.x/4.1~4.14, Android
    4.x/5.x/6.x/7.x/8.x
  • RIL Driver:
    Android 4.x/5.x/6.x/7.x/8.x
  • NDIS Driver:
    Windows 7/8/8.1/10
  • ECM Driver*:
    Linux 2.6/3.x/4.1~4.14
  • Gobinet Driver:
    Linux 2.6/3.x/4.1~4.14
  • QMI_WWAN Driver:
    Linux 3.x (3.4 or later)/4.1~4.14

 

Protocols Supported

  • TCP/UDP/PPP/FTP/HTTP/NTP/PING/QMI/CMUX*/HTTPS*/SMTP*/MMS*/FTPS*/SMTPS*/SSL*/FILE*

General Features

  1. Temperature Range: -40Ā°C ~ +85Ā°C
  2. Rx-diversity Antenna
  3. GPP E-UTRA Release 11
  4. Bandwidth: 1.4/3/5/10/15/20MHz
  5. 3GPP TS 27.007, 27.005 and Quectel Enhanced AT Commands

Approvals

  • CE (Europe)
  • FCC (North America)
Download

Download

LTE Cat 4 IoT/M2M/GNSS USB dongle (EG95) V1.1

Software can be downloaded from the following website:

5G-NB-IoT/KitSketches at master Ā· 5ghub/5G-NB-IoT (github.com)

To use the board with Arduino IDE and starts running Arduino projects and sketches, install the following software:

  • Install Arduino IDE for Windows from the following web site

https://www.arduino.cc/en/Main/Software

  • Download and Install LTE&GNSS modem driver for Windows:

https://github.com/5ghub/5G-NB-IoT/tree/master/Driver

  • Download and Install QNavigator and QCOM tools for Quectel EG95 here:

https://github.com/5ghub/5G-NB-IoT/tree/master/Tools

  • Download and install Arduino library (5G-NB-IoT_Arduino.zip)Ā here:

https://github.com/5ghub/5G-NB-IoT

All the following software can be installed from the GitHub location here:

https://github.com/5ghub/5G-NB-IoT

How to use QNavigator with EG95

How to use QCOM Tool with EG95

LTE cellular connectivity on Windows OS

How to Enable and View GNSS Satellites.pdf