Compact LTE Cat 4 IoT & GNSS (EG95-NA) – North America


This is an LTE category 4 module  with integrated GNSS for wide industrial and commercial uses. It has EG95 module  in USB dongle form factor. It is optimized specially for M2M and IoT applications and delivers 150Mbps downlink and 50Mbps uplink data rates.



EG95 is a series of LTE category 4 & GNSS module optimized specially for M2M and IoT applications. It is for North America regions. Adopting 3GPP LTE technology, it delivers 150Mbps downlink and 50Mbps uplink data rates. EG95 can be connected even in remote areas devoid of 4G network coverage.

EG-95 supports Qualcomm® IZat™ location technology Gen8C Lite (GPS, GLONASS, BeiDou, Galileo and QZSS). The integrated GNSS greatly simplifies product design, and provides quicker, more accurate and more dependable positioning.

A rich set of Internet protocols, industry-standard interfaces and abundant functionalities (USB serial drivers for Windows 7/8/10, Linux, Android) extend the applicability of the module to a wide range of M2M and IoT applications such as industrial router, industrial PDA, rugged tablet PC, video surveillance, digital signage and so on.

  1. LTE category 4 module optimized for broadband IoT applications
  2. Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage
  3. Standard PCI Express® MiniCard form factor (Mini PCIe) ideal for manufacturers to easily integrate wireless connectivity into their devices
  4. MIMO technology meets demands for data rate and link reliability in modem wireless communication systems
  5. Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment
  6. LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71.
  7. WCDMA: B2/B4/B5

Data Rate

  1. LTE FDD: 150 (DL)/50 (UL)
  2. DC-HSPA+: 42 (DL)/5.76 (UL)
  3. WCDMA: 384 (DL)/384 (UL)
  4. EDGE: 296 (DL)/236.8 (UL)
  5. GPRS: 107 (DL)/85.6 (UL)


  1. USB 2.0 with High Speed up to 480Mbps
  2. Nano USIM Interface
  4. UART × 2 (Main UART and Debug UART)
  5. RESET _N and  PWRKEY
  6. Main and Rx-diversity Antenna Interfaces
  7. GNSS Antenna Interface

Software Features

  • USB Serial Driver:
    Windows 7/8/8.1/10, Windows CE 5.0/6.0/7.0*,
  • Linux 2.6/3.x/4.1~4.14, Android
  • RIL Driver:
    Android 4.x/5.x/6.x/7.x/8.x
  • NDIS Driver:
    Windows 7/8/8.1/10
  • ECM Driver*:
    Linux 2.6/3.x/4.1~4.14
  • Gobinet Driver:
    Linux 2.6/3.x/4.1~4.14
  • QMI_WWAN Driver:
    Linux 3.x (3.4 or later)/4.1~4.14

Protocols Supported


General Features

  1. Temperature Range: -40°C ~ +85°C
  2. Rx-diversity Antenna
  3. GPP E-UTRA Release 11
  4. Bandwidth: 1.4/3/5/10/15/20MHz
  5. 3GPP TS 27.007, 27.005 and Quectel Enhanced AT Commands


  • CE (Europe)
  • FCC (North America)


LTE Cat 4 IoT/M2M/GNSS USB dongle (EG95)
LTE Cat 4 IoT/M2M/GNSS USB dongle (EG95) V1.1

Software can be downloaded from the following website:

5G-NB-IoT/KitSketches at master · 5ghub/5G-NB-IoT (

To use the board with Arduino IDE and starts running Arduino projects and sketches, install the following software:

  • Install Arduino IDE for Windows from the following web site

  • Download and Install LTE&GNSS modem driver for Windows:

  • Download and Install QNavigator and QCOM tools for Quectel EG95 here:

  • Download and install Arduino library ( here:

All the following software can be installed from the GitHub location here:

How to use QNavigator with EG95

How to use QCOM Tool with EG95

LTE cellular connectivity on Windows OS

How to Enable and View GNSS Satellites.pdf